steeb/Ender_3_Pro
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Upload files to "Klipper/ender/printer_data/config"

Browse Source
This commit is contained in:
steeb 2024-08-06 12:16:58 -07:00
parent f10fa86d7c
commit 1dde0a5552
3 changed files with 472 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
Klipper/ender/printer_data/config/KAMP_Settings.cfg Normal file
View File

@ -0,0 +1,36 @@
# Below you can include specific configuration files depending on what you want KAMP to do:
[include ./KAMP/Adaptive_Meshing.cfg] # Include to enable adaptive meshing configuration.
[include ./KAMP/Line_Purge.cfg] # Include to enable adaptive line purging configuration.
#[include ./KAMP/Voron_Purge.cfg] # Include to enable adaptive Voron logo purging configuration.
#[include ./KAMP/Smart_Park.cfg] # Include to enable the Smart Park function, which parks the printhead near the print area for final heating.
[gcode_macro _KAMP_Settings]
description: This macro contains all adjustable settings for KAMP
# The following variables are settings for KAMP as a whole.
variable_verbose_enable: True # Set to True to enable KAMP information output when running. This is useful for debugging.
# The following variables are for adjusting adaptive mesh settings for KAMP.
variable_mesh_margin: 0 # Expands the mesh size in millimeters if desired. Leave at 0 to disable.
variable_fuzz_amount: 0 # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Leave at 0 to disable.
# The following variables are for those with a dockable probe like Klicky, Euclid, etc. # ---------------- Attach Macro | Detach Macro
variable_probe_dock_enable: False # Set to True to enable the usage of a dockable probe. # ---------------------------------------------
variable_attach_macro: 'Attach_Probe' # The macro that is used to attach the probe. # Klicky Probe: 'Attach_Probe' | 'Dock_Probe'
variable_detach_macro: 'Dock_Probe' # The macro that is used to store the probe. # Euclid Probe: 'Deploy_Probe' | 'Stow_Probe'
# Legacy Gcode: 'M401' | 'M402'
# The following variables are for adjusting adaptive purge settings for KAMP.
variable_purge_height: 0.8 # Z position of nozzle during purge, default is 0.8.
variable_tip_distance: 0 # Distance between tip of filament and nozzle before purge. Should be similar to PRINT_END final retract amount.
variable_purge_margin: 10 # Distance the purge will be in front of the print area, default is 10.
variable_purge_amount: 30 # Amount of filament to be purged prior to printing.
variable_flow_rate: 12 # Flow rate of purge in mm3/s. Default is 12.
# The following variables are for adjusting the Smart Park feature for KAMP, which will park the printhead near the print area at a specified height.
variable_smart_park_height: 10 # Z position for Smart Park, default is 10.
gcode: # Gcode section left intentionally blank. Do not disturb.
{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

111
Klipper/ender/printer_data/config/moonraker.conf Normal file
View File

@ -0,0 +1,111 @@
[server]
host: 0.0.0.0
port: 7125
# The maximum size allowed for a file upload (in MiB). Default 1024 MiB
max_upload_size: 1024
# Path to klippy Unix Domain Socket
klippy_uds_address: ~/printer_data/comms/klippy.sock
[file_manager]
# post processing for object cancel. Not recommended for low resource SBCs such as a Pi Zero. Default False
enable_object_processing: true
[update_manager Klipper-Adaptive-Meshing-Purging]
type: git_repo
channel: dev
path: ~/Klipper-Adaptive-Meshing-Purging
origin: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging.git
managed_services: klipper
primary_branch: main
[authorization]
cors_domains:
https://my.mainsail.xyz
http://my.mainsail.xyz
http://*.local
http://*.lan
trusted_clients:
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FE80::/10
::1/128
# enables partial support of Octoprint API
[octoprint_compat]
# enables moonraker to track and store print history.
[history]
# this enables moonraker announcements for mainsail
[announcements]
subscriptions:
mainsail
# this enables moonraker's update manager
[update_manager]
refresh_interval: 168
enable_auto_refresh: True
[update_manager mainsail]
type: web
channel: stable
repo: mainsail-crew/mainsail
path: ~/mainsail
[update_manager mainsail-config]
type: git_repo
primary_branch: master
path: ~/mainsail-config
origin: https://github.com/mainsail-crew/mainsail-config.git
managed_services: klipper
### moonraker-timelapse
### Don't forget to include timelapse.cfg to your printer.cfg
### Uncomment to enable moonraker-timelapse
#[update_manager timelapse]
#type: git_repo
#primary_branch: main
#path: ~/moonraker-timelapse
#origin: https://github.com/mainsail-crew/moonraker-timelapse.git
#managed_services: klipper moonraker
#[timelapse]
### Directory where the generated video will be saved
#output_path: ~/timelapse/
### Directory where ffmpeg is installed
#ffmpeg_binary_path: /usr/bin/ffmpeg
# Crowsnest update_manager entry
[update_manager crowsnest]
type: git_repo
path: ~/crowsnest
origin: https://github.com/mainsail-crew/crowsnest.git
managed_services: crowsnest
install_script: tools/pkglist.sh
# Sonar update_manager entry
[update_manager sonar]
type: git_repo
path: ~/sonar
origin: https://github.com/mainsail-crew/sonar.git
primary_branch: main
managed_services: sonar
install_script: tools/install.sh
[update_manager fluidd-config]
type: git_repo
primary_branch: master
path: ~/fluidd-config
origin: https://github.com/fluidd-core/fluidd-config.git
managed_services: klipper
[update_manager fluidd]
type: web
channel: stable
repo: fluidd-core/fluidd
path: ~/fluidd

325
Klipper/ender/printer_data/config/printer.cfg Normal file
View File

@ -0,0 +1,325 @@
# This file contains pin mappings for the Creality Ender 3 Pro with
# the BigTreeTech SKR Mini E3 V2.0.
# To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PA14".
# The "make flash" command does not work on the SKR mini E3. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the SKR
# mini E3 with that SD card.
[include fluidd.cfg]
[include KAMP_Settings.cfg]
[virtual_sdcard]
path: /home/ender/printer_data/gcodes
on_error_gcode: CANCEL_PRINT
[exclude_object]
[firmware_retraction]
[pause_resume]
# This adds a bed screws adjust GCode, that moves the nozzle around for you so you can paper adjust.
[bed_screws]
screw1: 31,37
screw1_name: Front left screw
screw2: 31,208
screw2_name: Rear left screw
screw3: 201,208
screw3_name: Rear right screw
screw4: 201,37
screw4_name: Front right screw
[bltouch]
sensor_pin: ^PC14
control_pin: PA1
x_offset: -20
y_offset: 0
#z_offset: 0
probe_with_touch_mode: True
pin_up_touch_mode_reports_triggered: True
stow_on_each_sample: False # Keep the probe extended between points
samples: 2 # Probe each point at least twice
samples_tolerance: 0.0125 # If those measurements aren't this close then
samples_tolerance_retries: 5 # Re-probe this many times and use the average
#Original config below - I never used it. Delete this section if auto-homing and bed meshing works.
#sensor_pin: ^PC14
#control_pin: PA1
#x_offset: -36
#y_offset: 0
#z_offset: 2.10
#stow_on_each_sample: False
[stepper_x]
step_pin: PB13
dir_pin: !PB12
enable_pin: !PB14
microsteps: 64
rotation_distance: 40
endstop_pin: ^PC0
position_endstop: 0
position_min: 0
position_max: 230
homing_speed: 50
[tmc2209 stepper_x]
uart_pin: PC11
tx_pin: PC10
uart_address: 0
run_current: 0.580
interpolate: False
[stepper_y]
step_pin: PB10
dir_pin: !PB2
enable_pin: !PB11
microsteps: 64
rotation_distance: 40
endstop_pin: ^PC1
position_endstop: -12
position_min: -12
position_max: 230
homing_speed: 50
[tmc2209 stepper_y]
uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 0.580
interpolate: False
[stepper_z]
step_pin: PB0
dir_pin: PC5
enable_pin: !PB1
microsteps: 64
rotation_distance: 8
# endstop_pin: ^PC2
# position_endstop: 0.0
endstop_pin: probe:z_virtual_endstop
position_min: -4
position_max: 230
[tmc2209 stepper_z]
uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 0.580
interpolate: False
[extruder]
pressure_advance: 0.122
step_pin: PB3
dir_pin: !PB4
enable_pin: !PD2
max_extrude_only_distance: 900.0
max_extrude_cross_section: 50.0
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
min_temp: 0
max_temp: 300
rotation_distance: 31.562
microsteps: 16
[tmc2209 extruder]
uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 5
[heater_bed]
heater_pin: PC9
sensor_type: ATC Semitec 104GT-2
sensor_pin: PC3
#control: pid
#pid_Kp: 54.027
#pid_Ki: 0.770
#pid_Kd: 948.182
min_temp: 0
max_temp: 130
[heater_fan nozzle_cooling_fan]
pin: PC7
[fan]
pin: PC6
[mcu]
serial: /dev/serial/by-id/usb-Klipper_stm32f103xe_34FFD7054D50383524500943-if00
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[static_digital_output usb_pullup_enable]
pins: !PA14
[board_pins]
aliases:
# EXP1 header
EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PB15, EXP1_10=<5V>
[display]
lcd_type: st7920
cs_pin: EXP1_7
sclk_pin: EXP1_6
sid_pin: EXP1_8
encoder_pins: ^EXP1_5, ^EXP1_3
click_pin: ^!EXP1_2
[output_pin beeper]
pin: EXP1_1
[display_glyph bed]
data:
................
................
................
................
................
................
................
................
................
................
...**********...
..*..........*..
.*............*.
*..............*
****************
................
[display_glyph bed_heat1]
data:
................
......*...*.....
......*...*.....
.....*...*......
.....*...*......
......*...*.....
......*...*.....
.....*...*......
.....*...*......
................
...**********...
..*..........*..
.*............*.
*..............*
****************
................
[display_glyph bed_heat2]
data:
................
.....*...*......
.....*...*......
......*...*.....
......*...*.....
.....*...*......
.....*...*......
......*...*.....
......*...*.....
................
...**********...
..*..........*..
.*............*.
*..............*
****************
................
[display_glyph feedrate]
data:
................
................
................
......******....
....**********..
...****....****.
..***........**.
.***..........*.
.**..*..........
***...*.........
**.....*........
**......**......
**......***.....
**.......**.....
................
................
[bed_mesh]
speed: 100
horizontal_move_z: 8
mesh_min: 35, 25
mesh_max: 210, 210
probe_count: 6
fade_start: 0
mesh_pps: 2, 2
algorithm: bicubic
bicubic_tension: 0.2
move_check_distance: 5
split_delta_z: .025
[gcode_macro G29]
gcode:
BED_MESH_CLEAR
BED_MESH_CALIBRATE
BED_MESH_PROFILE SAVE=default
BED_MESH_PROFILE LOAD=default
[safe_z_home]
home_xy_position: 145,115
speed: 80.0
z_hop: 10.0
z_hop_speed: 10.0
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 26.433
#*# pid_ki = 1.632
#*# pid_kd = 107.055
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 72.314
#*# pid_ki = 1.759
#*# pid_kd = 743.026
#*#
#*# [bltouch]
#*# z_offset = 3.275
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# -0.171875, -0.120000, -0.072500
#*# -0.067188, 0.009375, 0.090000
#*# 0.029062, 0.128125, 0.260312
#*# x_count = 3
#*# y_count = 3
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = lagrange
#*# tension = 0.2
#*# min_x = 90.71
#*# max_x = 140.29
#*# min_y = 90.71
#*# max_y = 140.29