From d2a6096d650601a1af176084e15ed882df868a4a Mon Sep 17 00:00:00 2001 From: steeb Date: Tue, 6 Aug 2024 12:03:37 -0700 Subject: [PATCH] Upload files to "PrusaSlicer" --- ..._Klipperized-PrusaSlicer_config_bundle.ini | 419 ++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 PrusaSlicer/Ender_3_Klipperized-PrusaSlicer_config_bundle.ini diff --git a/PrusaSlicer/Ender_3_Klipperized-PrusaSlicer_config_bundle.ini b/PrusaSlicer/Ender_3_Klipperized-PrusaSlicer_config_bundle.ini new file mode 100644 index 0000000..38bea3f --- /dev/null +++ b/PrusaSlicer/Ender_3_Klipperized-PrusaSlicer_config_bundle.ini @@ -0,0 +1,419 @@ +# generated by PrusaSlicer 2.7.4 on 2024-08-06 at 18:50:35 UTC + +[print:Ender 3 Pro - 0.20 mm NORMAL SPEED (0.4 mm nozzle)] +arc_fitting = disabled +avoid_crossing_curled_overhangs = 0 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0 +bridge_acceleration = 250 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 25 +brim_separation = 0 +brim_type = outer_only +brim_width = 0 +compatible_printers = +compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 +complete_objects = 0 +default_acceleration = 500 +dont_support_bridges = 1 +draft_shield = disabled +elefant_foot_compensation = 0.1 +enable_dynamic_overhang_speeds = 1 +external_perimeter_acceleration = 0 +external_perimeter_extrusion_width = 0.42 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extra_perimeters_on_overhangs = 0 +extruder_clearance_height = 25 +extruder_clearance_radius = 55 +extrusion_width = 0.44 +fill_angle = 45 +fill_density = 15% +fill_pattern = gyroid +first_layer_acceleration = 0 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 18 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = octoprint +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 0 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.44 +infill_first = 0 +infill_overlap = 23% +infill_speed = 30 +inherits = 0.20 mm NORMAL SPEED (0.4 mm nozzle) @CREALITY +interface_shells = 0 +ironing = 0 +ironing_flowrate = 10% +ironing_spacing = 0.1 +ironing_speed = 20 +ironing_type = top +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_bead_width = 85% +min_feature_size = 25% +min_skirt_length = 4 +mmu_segmented_region_interlocking_depth = 0 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode +overhang_speed_0 = 15 +overhang_speed_1 = 15 +overhang_speed_2 = 20 +overhang_speed_3 = 25 +overhangs = 0 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.44 +perimeter_generator = arachne +perimeter_speed = 30 +perimeters = 3 +post_process = +print_settings_id = +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 1 +skirts = 2 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 20 +solid_infill_acceleration = 0 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.44 +solid_infill_speed = 30 +spiral_vase = 0 +staggered_inner_seams = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.36 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1 +support_material_speed = 30 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 40 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +support_tree_angle = 40 +support_tree_angle_slow = 25 +support_tree_branch_diameter = 2 +support_tree_branch_diameter_angle = 5 +support_tree_branch_diameter_double_wall = 3 +support_tree_branch_distance = 1 +support_tree_tip_diameter = 0.8 +support_tree_top_rate = 15% +thick_bridges = 1 +thin_walls = 0 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_acceleration = 0 +top_solid_infill_speed = 20 +top_solid_layers = 5 +top_solid_min_thickness = 0 +travel_acceleration = 0 +travel_speed = 150 +travel_speed_z = 0 +wall_distribution_count = 1 +wall_transition_angle = 10 +wall_transition_filter_deviation = 25% +wall_transition_length = 100% +wipe_tower = 0 +wipe_tower_acceleration = 0 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_cone_angle = 0 +wipe_tower_extra_flow = 100% +wipe_tower_extra_spacing = 100% +wipe_tower_extruder = 0 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[filament:steeb's PETG] +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = printer_notes!~/.*NO_TEMPLATES.*/ and printer_notes!~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes!~/.*PRINTER_MODEL_MK4IS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and num_extruders>1) +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 3 +enable_dynamic_fan_speeds = 0 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FFFFFF +filament_cooling_final_speed = 2 +filament_cooling_initial_speed = 3 +filament_cooling_moves = 1 +filament_cost = 27.82 +filament_density = 1.27 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 14 +filament_loading_speed_start = 19 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 0 +filament_multitool_ramming = 0 +filament_multitool_ramming_flow = 10 +filament_multitool_ramming_volume = 10 +filament_notes = "" +filament_purge_multiplier = 100% +filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = 2 +filament_retract_length_toolchange = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_restart_extra_toolchange = nil +filament_retract_speed = 40 +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_stamping_distance = 0 +filament_stamping_loading_speed = 20 +filament_toolchange_delay = 0 +filament_travel_lift_before_obstacle = nil +filament_travel_max_lift = nil +filament_travel_ramping_lift = nil +filament_travel_slope = nil +filament_type = PETG +filament_unload_time = 0 +filament_unloading_speed = 20 +filament_unloading_speed_start = 100 +filament_vendor = Generic +filament_wipe = nil +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +full_fan_speed_layer = 5 +idle_temperature = nil +inherits = Generic PETG @Template +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 10 +overhang_fan_speed_0 = 0 +overhang_fan_speed_1 = 0 +overhang_fan_speed_2 = 0 +overhang_fan_speed_3 = 0 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 240 + +[filament:steeb's PLA] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 0 +disable_fan_first_layers = 3 +enable_dynamic_fan_speeds = 0 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #0E5FED +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 0 +filament_cost = 19.35 +filament_density = 1.23 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_multitool_ramming = 0 +filament_multitool_ramming_flow = 10 +filament_multitool_ramming_volume = 10 +filament_notes = ";Full spool weight: 1280g" +filament_purge_multiplier = 100% +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_length_toolchange = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_restart_extra_toolchange = nil +filament_retract_speed = nil +filament_settings_id = "ABS - KVP" +filament_soluble = 0 +filament_spool_weight = 1000 +filament_stamping_distance = 0 +filament_stamping_loading_speed = 20 +filament_toolchange_delay = 0 +filament_travel_lift_before_obstacle = nil +filament_travel_max_lift = nil +filament_travel_ramping_lift = nil +filament_travel_slope = nil +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 65 +first_layer_temperature = 210 +full_fan_speed_layer = 0 +idle_temperature = nil +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +overhang_fan_speed_0 = 0 +overhang_fan_speed_1 = 0 +overhang_fan_speed_2 = 0 +overhang_fan_speed_3 = 0 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 200 + +[printer:Klipperized Ender-3 Pro (0.4 mm nozzle)] +autoemit_temperature_commands = 1 +bed_custom_model = +bed_custom_texture = +bed_shape = 3x3,228x3,228x228,3x228 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n +between_objects_gcode = +binary_gcode = 0 +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Generic PLA @CREALITY" +default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @CREALITY" +deretract_speed = 40 +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors +extra_loading_move = -2 +extruder_colour = #FCE94F +extruder_offset = 0x0 +gcode_flavor = klipper +high_current_on_filament_swap = 0 +host_type = prusalink +inherits = Creality Ender-3 Pro (0.4 mm nozzle) +layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z} +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 5000 +machine_max_acceleration_extruding = 500 +machine_max_acceleration_retracting = 1000 +machine_max_acceleration_travel = 500 +machine_max_acceleration_x = 500 +machine_max_acceleration_y = 500 +machine_max_acceleration_z = 100 +machine_max_feedrate_e = 60 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 10 +machine_max_jerk_e = 5 +machine_max_jerk_x = 8 +machine_max_jerk_y = 8 +machine_max_jerk_z = 0.4 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 0.32 +max_print_height = 250 +min_layer_height = 0.06 +multimaterial_purging = 140 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = M25 ; pause print +print_host = +printer_model = ENDER3PRO +printer_settings_id = +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 0 +retract_before_travel = 2 +retract_before_wipe = 70% +retract_layer_change = 1 +retract_length = 5 +retract_length_toolchange = 1 +retract_lift = 0 +retract_lift_above = 0.2 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 60 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = G90 ; use absolute coordinates\n\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG28 ; home all axis\nM190S{first_layer_bed_temperature[0]} ; wait for bed temp to calibrate bed mesh\nG4 S30 ; allow partial nozzle warmup\n\n\nM117\n\nBED_MESH_CALIBRATE ; do KAMP stuff\n\nG1 Z15 F240\nG1 X2.0 Y10 F3000\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\n\n\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\n\nG92 E0\n\n\nSTART_PRINT\n\nLINE_PURGE +template_custom_gcode = +thumbnails = +thumbnails_format = PNG +toolchange_gcode = +travel_lift_before_obstacle = 0 +travel_max_lift = 0 +travel_ramping_lift = 0 +travel_slope = 0 +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 +