steeb/Ender_3_Pro
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update Setup Documentation

steeb 2024-08-06 17:37:45 -07:00
parent cf2da11c95
commit 1600efc21e
1 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Setup-Documentation.md

@ -10,7 +10,7 @@ The motherboard (BTT SKR Mini E3 V2.0) is **NOT** the stock component; keep this
The direct drive unit is a Creality-branded upgrade, so should not require much special attention. The direct drive unit is a Creality-branded upgrade, so should not require much special attention.
The BL-Touch probe appears to be a legit unit, so normal configs for it should work. The BL-Touch probe appears to be a legit unit, so normal configs for it should work (knock-off units exist and there are many reports of shoddy ones).
Before getting into the printer itself, let's go over how to connect to the Pi, which is running the whole show. Before getting into the printer itself, let's go over how to connect to the Pi, which is running the whole show.
@ -28,6 +28,8 @@ The X and Y-axis belts were both incredibly loose and needed to be tightened, bu
The Z-axis lead screw couplings were *way* over-tightened. I've had to re-loosen them several times during testing, so it will likely happen again. The Z-axis lead screw couplings were *way* over-tightened. I've had to re-loosen them several times during testing, so it will likely happen again.
Cable management was an absolute mess but aside from removing cables that went nowhere and printing a cable chain to keep things tidy, there wasn't much to do here (except for the aforementioned fans.)
# Raspberry Pi 4 # Raspberry Pi 4
## Overview ## Overview
<pre> <pre>