From cf2da11c9535825d07ba614410abfdc8a1e5d7a0 Mon Sep 17 00:00:00 2001 From: steeb Date: Tue, 6 Aug 2024 17:36:07 -0700 Subject: [PATCH] Update Setup Documentation --- Setup-Documentation.md | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Setup-Documentation.md b/Setup-Documentation.md index 128c083..31ec359 100644 --- a/Setup-Documentation.md +++ b/Setup-Documentation.md @@ -21,6 +21,13 @@ I have *had* two build plates for this. The stock one from Creality with The PEI plate is being returned as defective - it doesn't work on my other printers, either. I've ordered a new stock mat that will hopefully correct any of the weird leveling issues I've had. **Addendum:** It seems to have helped pretty dramatically. +### Things I Had To Fix +The motherboard cooling fan would turn on when the parts fan was supposed to turn on and the parts fan ran all of the time. I swapped the connectors on the board while installing the new control box. + +The X and Y-axis belts were both incredibly loose and needed to be tightened, but they *did* mostly work with some minor skipping. + +The Z-axis lead screw couplings were *way* over-tightened. I've had to re-loosen them several times during testing, so it will likely happen again. + # Raspberry Pi 4 ## Overview