steeb/home_network_notes
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update Extreme Networks WS-AP3825I - How to flash with OpenWRT

steeb 2024-11-04 19:06:21 -07:00
parent c655902f89
commit 1c4f206b9c
1 changed files with 7 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Extreme Networks WS-AP3825I - How to flash with OpenWRT.-.md

@ -14,24 +14,26 @@ sudo picocom -b 115200 /dev/ttyUSB0
2. Once we know that we can see the cable, go ahead and power up the AP and connect the RJ45 end of the serial cable to the Console port (**NOT** LAN2).
3. At this point, the `picocom` terminal should prompt for a login. Use `admin` for the username and `new2day` for the password.
3. Press 'Enter' on your keyboard when the message `Scanning JFFS2 FS: .` comes up to drop into a BOOT mode
4. In a new terminal window, create a temporary directory and move into it with
4. At this point, the `picocom` terminal should prompt for a login. Use `admin` for the username and `new2day` for the password.
5. In a new terminal window, create a temporary directory and move into it with
```<sh>
cd $(mktemp -d)
```
5. Still in the new terminal window, download the firmware image,
6. Still in the new terminal window, download the firmware image,
```
curl https://downloads.openwrt.org/releases/23.05.5/targets/mpc85xx/p1020/openwrt-23.05.5-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin -o ws-ap3825i-initramfs.bin
```
6. Finally, in that same new terminal window, start a TFTP server using
7. Finally, in that same new terminal window, start a TFTP server using
```
sudo dnsmasq -d --enable-tftp --port 0 --tftp-root $(pwd)
```
7. In the original `ttyUSB0` terminal, run the following commands, being sure to enter the correct IP address for the TFTP server (the computer you're using) and the AP.
8. In the original `ttyUSB0` terminal, run the following commands, being sure to enter the correct IP address for the TFTP server (the computer you're using) and the AP.
```
setenv ramboot_openwrt "setenv ipaddr <server_ip>; setenv serverip <access_point_ip>; tftpboot 0x2000000 ws-ap3825i-initramfs.bin; interrupts off; bootm start 0x2000000; bootm loados; fdt resize; fdt boardsetup; fdt resize; fdt boardsetup; fdt chosen; fdt resize; fdt chosen; bootm prep; bootm go;"