steeb/Ender_3_Pro
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update Setup Documentation

steeb 2024-08-04 18:25:52 -07:00
parent 6297b378e0
commit 14047d37b7
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Setup-Documentation.md

@ -126,7 +126,7 @@ Home all axes and then enter <code>PROBE_CALIBRATE</code> into the command line.
Once the Z offset is set, you can now manually level the be by entering <code>BED_SCREWS_ADJUST</code> into the command line. The machine will then go to each corner one-by-one while you adjust the screw knobs and repeat the paper test, like in the Z offset section. If you need to make an adjustment to the screw (more than 1/8 of a turn), click "Adjustment", if the setting is fine, click "Accept" - once you accept all four corners in a row, the bed is leveled. Once the Z offset is set, you can now manually level the be by entering <code>BED_SCREWS_ADJUST</code> into the command line. The machine will then go to each corner one-by-one while you adjust the screw knobs and repeat the paper test, like in the Z offset section. If you need to make an adjustment to the screw (more than 1/8 of a turn), click "Adjustment", if the setting is fine, click "Accept" - once you accept all four corners in a row, the bed is leveled.
## Bed Mesh Calibration ### Bed Mesh Calibration
[Official documentation link](https://www.klipper3d.org/Bed_Mesh.html) [Official documentation link](https://www.klipper3d.org/Bed_Mesh.html)
**NOTE:** I'm not certain this is 100% necessary as this unit appears to have a pretty dang flat bed; my results have not been much different when using a bed mesh. I feel that the BL Touch probe installed is either wonky or inaccurate. If and when I switch this machine over to hard mounts, this may be a more important set. **NOTE:** I'm not certain this is 100% necessary as this unit appears to have a pretty dang flat bed; my results have not been much different when using a bed mesh. I feel that the BL Touch probe installed is either wonky or inaccurate. If and when I switch this machine over to hard mounts, this may be a more important set.